Weather-resistant water-based peelable protective film

01Product introduction

This product is a one-component viscous liquid. Apply this product to metal, glass, stone, wood, ceramics, paint, plastic and other surfaces, and dry naturally to form a film. The membrane body has anti-scratch, anti-wear, anti-dust and cleaning protection. The membrane body has good solvent resistance, grease resistance, rainwater washing resistance, and long-term high temperature exposure. The film body has the characteristics of no stickiness in summer, no brittleness in winter, and no residue after cleaning. Especially suitable for long-term weather protection in indoor and outdoor natural environment. Typical uses such as: glass curtain wall, aluminum alloy doors and windows, stainless steel parts, automobile transportation protection, elevator engineering, glass fiber reinforced plastic products, metal rust prevention, large construction machinery, spray booth barrier protection, etc.

02Product performance

1. Water-based formula, non-toxic and tasteless. 2. Does not contain heavy metals, halogen-free, RoHS-compliant. 3. The protection period in the natural environment can reach more than one year, and it can still be peeled off. 4. It can be used on the surface of various substrates. The film body can be peeled off as a whole without residue, and it has anti-fouling and anti-rust properties. 5. No damage to metal, glass, stone, wood, ceramics and other substrates. 6. To achieve easy peeling, 10-15 square meters can be sprayed per kilogram. 7. Flexible construction process, suitable for spraying, roller coating, brushing and other processes. 8. The construction is convenient, special-shaped materials are still applicable, and labor costs are saved. 9. Overcome the aging resistance of traditional film. Types of flame retardants

04

construction technology

1. Substrate surface cleaning

Before construction, oil stains and water stains on the surface of the substrate should be removed, and the surface of the substrate should be dried with cotton yarn or towel to keep the surface of the substrate dry.

2. Construction environment

During the construction of the peelable protective film, the ambient temperature shall not be lower than 5 ℃. When the wind speed is greater than 5m/s, it is not suitable for construction.

3. Construction tools

Air compressor, pneumatic spray gun, roller or wool brush.

4. Construction

4.1 This product can be applied by pneumatic spraying, roller coating or brushing with wool, and dry naturally. The specific method is similar to ordinary paint and paint construction.

4.2 It can be used after opening. Different processes can be diluted with water according to the process requirements. It is recommended to add 10-15% water for dilution when using the spraying process for horizontal substrates. It is recommended to add 8-12% water for vertical substrates using the spraying process. % water for dilution, it should be fully stirred before use. It can be used directly by roller coating or brush coating process. It is not recommended to add water.

4.3 According to the specific requirements of substrate protection, construction of different thicknesses can be carried out.

4.4 Taking 10m2 per kilogram as an example, the film can be formed in about 60 minutes at 25°C, and the resistance and peeling effect can be achieved after six hours of film formation.

5. Peel off

When the peelable protective film is peeled off, the ambient temperature should be 5-35 ℃. If the temperature is too low, the protective film will become brittle, and if the temperature is too high, the protective film will become soft, which is not conducive to the peeling of the protective film.